 |
CIRCULAR /
LINEAR
DUAL LNB
Designed to receive 119 & 118.8 at the same
time. with Dual output allows you to use 2 receivers at the same time
and receive all the channels from both 119 and 118.8 at the same time.
|
|
 |
Superdish to DISH 500+ Repoint kit
with 129 bracket
Convert SuperDish 121 bird to dish 500+ or dish 1000+ by replacing the
lnb only, without replacing the reflector, arm or pole. it also comes
with the braket for satellite 129
|
|
 |
Invacom QPH-031 Circular &
Linear Quad Polar LNBF |
|
 |
KU Linear Single LNB 10750
Standard Ku Band Digital Ready
Dual LNB for Satellite Systems Suitable for existing Analog and Digital
systems. Low noise temperature. Economical. Easy to install. Lightweight |
|
 |
Dual KU Linear LNB 10750
Standard Ku Band Digital Ready
Dual LNB for Satellite Systems Suitable for existing Analog and Digital
systems. Low noise temperature. Economical. Easy to install. Lightweight |
|
 |
DirecTV DSS Dual LNB 11250
2-Outputs. Use it to connect multiple
receivers to one dish. Use it for one orbital location. It is
appropriate for an 18” (or "DISH 300”) dish. It can be used alone with
DSS installations. Circular type |
|
 |
DishPro Dual LNBF:
Use it for one orbital location.
Circular type. A DISH Pro Dual LNBF looks at
one orbital location. It has two output ports to directly connect to two
single-tuner DISH Pro receivers, or one dual-tuner DISH Pro receiver. It
can also connect to DISH Pro DP21 or DP34 switches, if needed |
|
 |
Dual
Legacy LNB
Use it for one orbital location. Circular
type. A DISH Pro Dual LNBF looks at one orbital location. It has two
output ports to directly connect to two single-tuner DISH Pro receivers,
or one dual-tuner DISH Pro receiver. It can also connect to DISH Pro
DP21 or DP34 switches, if needed. |
|
 |
Used Dish Network DishPro Twin LNBF
Use it to look at the 110 and 119 orbital
locations, using a DISH 500. it can directly connect to two receivers.
This LNBF can connect to a DishPro DP34 switch, if more receivers, or
additional orbital locations, are required in the installation. Circular
type. |
|
|
 |
Dish
Network DishPro PLUS Twin LNBF
Use it to look at the 110 and 119 orbital
locations, it allows one coax cable to carry the satellite signal
requirements for two receivers or one dual tuner satellite receiver
(special DPPlus Separator is used to split the signal). Circular type. |
|
 |
Dish Network DishPro Quad LNBF
Use it to look at the 110 and
119 orbital locations, using a DISH 500. it can directly connect to four
receivers. This LNBF can connect to a DishPro DP34 switch, if more
receivers, or additional orbital locations, are required in the
installation. Circular type. |
|
 |
Dish Network Legacy Twin LNBF
Use it to look at the 110 and
119 orbital locations, using a DISH 500. it can directly connect to Two
receivers. |
|
 |
Dish Network Legacy Quad LNBF
Use it to look at the 110 and
119 orbital locations, using a DISH 500. it can directly connect to four
receivers. |
|
