|
| |
|
2 X 4 Multi-Switch
Use this multi-switch for a DIRECTV or FTA dish w/DUAL LNB
NOT for the DIRECTV multi-satellite dish.
Non-powered - powered by satellite receiver, does NOT use external power supply.
Up to FOUR satellite receivers* can independently select different satellite channels.
Up to FOUR (4) receiver* connections from ONE (1) Standard DIRECTV or FTA dish (DUAL LNB required).
TiVo units require TWO connections to dish & would count a TWO receivers.
To minimize off-air analog signal ghosting or off-air digital signal degradation, the 75 ohm terminators should be used on all unused outputs. Any unused cable connected to the output should also be thus terminated at the connector plate. Save unused terminators for future applications.
This switch is not for use with Dish 500 or DirecTV Plus dishes with two dual LNB's
Sample installation: Connecting up to 4 dishes to up to 4 receivers, utilizing:
Qty 4: Dual LNBFs,
Qty 4: 2x4 or 3x4 Multiswitchs, (or you could use a 3 x 8 multiswitch if you want to connect up-to 8 receivers), and
Qty 4: 4-Way DiSEqC switches
|
|
